JFY series CATERPILLAR type stainless steel cooling belt
It is used for cooling and squeezing and conveying and crushing hot melt extrudated products. and made of cooling rollers, coveyor belt , crushing device etc, the obtained flake materials is with 1-2 mm thickness.
Main Features:
Easy operation safe to operate
Adjustable film thickness
speed is adjusted by inverter or electro-megnatic device
Part in contact with materials made by stainless steel
Technical Parameter:
Model
Caterpillar length (MM)
Roller diameter (MM)
Roller lenth (MM)
Driver power (KW)
Cooling type
Capacity (KG/HR)
Overall dimension (MM)
JFY-104
1000
160
415
0.37
Air&water
50
1200×720×840
JFY-406
4000
180
415
0.55
Air&water
150-200
1960×720×840
JFY-507
5000
208
700
0.75
Air&water
300
4200×920×900
JFY-508
5000
325
800
1.1
Air&water
400
5200×1120×900
JFY-510
5000
325
800
1.5
Air&water
500
6200×1120×1200
JFY-610
6000
325
1000
1.5
Air&water
600-700
7200×1320×1350
JFY-710
7000
325
1000
2.2
Air&water
800-1000
8200×1320×1450
GDY series one piece stainless steel cooling belt
GDY series stainless steel cooling belt is used when the extruded materials have to be cooled as possible and without water contact,it can give the materials the best technical and quality characteristics. European SANDVIK stainless steel belts are equipped in our cooling belts and crushers;chill water will spray cooling water from bottom side to cool the calendered sheet without being in contact with hot melt materials.
Main Features :
High efficiency and good performance
Easy to clean and maintenance
avoiding cross contamination for mateirlas
Higher capacity compared with tradtiional cooling belt
